Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > speedo

[748man]

anyone know how to remove the perspex
and bezel from the speedo without breaking it preferably!!!!! need to replace the inards,from kph to mph cheers:

[Rattler]

.....I haven't done this, but have heard that its a case of patience and application!!!

I reckon its easier to get a MPH speedo!!

Tim

[Duncan Disorderly]

Some time back I rang a company from MCN classifieds that advertised MPH speedo exchanges and asked them about this. Answer - they carefully cut round the casing of the speedo & replace the neccessary then glue it back together.

The join is hidden & it should be fine if done with care I would have thought. Any way it sup to U, good luck.

[neil748r]

You could maybe try contacting these guys http://www.superdials.com/

They supply complete replacement dial faces with installation instructions so they should know how to take a speedo apart the right way (and get it back together again!).

Neil.

P.S. They are UK based.

[Edited on 21-12-2003 by neil748r]

[uncle porry]

i have a instruction guide for the removal/installation for the dials, if you want i can e mail you a copy