Ducati Sporting Club UK
Private Adverts
Use this forum for all private adverts. You must have been a registered member on this board for at least 14 days before you are allowed to post.
 
 
Thread Tools Display Modes
  #1  
Old 16-Nov-2011, 01:00
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,274
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
Wanted - DDS Diagnotsic Lead info

I need to make or purchase a diagnostic connection lead for my DDS

I can easily get the 26 pin High Density D-type connector that fits the DDS and a 3 pin for the other end (Haven't looked into the type of connector used by the later bikes)
So ideally need to know which pins to connect to on the DDS end.

Not sure if the DDS manual gives any info of if there are any PDFs available with info
Maybe I should have gone to the Mechanex show today or tomorrow and asked the Tecnomotor importers but had to go to work and earn some money


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  #2  
Old 17-Nov-2011, 13:36
Iconic944ss's Avatar
Iconic944ss Iconic944ss is offline
Registered Forum User
WSB Hero
Bikes: 1993 - 944SS & Aprilia Falco
 
Posts: 7,794
Join Date: Oct 2002
Dunno if this is the same gear Kev, but oddly I only ended up on this thread last nite:

http://www.ducati-upnorth.com/forum/...read.php?15209
Quote+Reply
  #3  
Old 17-Nov-2011, 22:59
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,274
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
Thanks for your input Frank but I need the Leads for the official Ducati Diagnostic system the DDS that replaced the Mathesis.
Once I have the info I need I can then see how to adapt the leads from my Mathesis to the DDS.


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  #4  
Old 18-Nov-2011, 00:30
chrisw's Avatar
chrisw chrisw is offline
Registered Forum User
500SD
Bikes: 999 Mono/1198S
 
Posts: 803
Join Date: Jun 2002
Mood: Messing with diagnostics
For your info the centre pin of the 3 way superseal connector is -ve ground and the outer pin is the KKL (the third pin is not connected to anything).

Don't have any experience of the DDS.
Quote+Reply
  #5  
Old 18-Nov-2011, 02:31
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,274
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
Quote:
Originally Posted by chrisw
For your info the centre pin of the 3 way superseal connector is -ve ground and the outer pin is the KKL (the third pin is not connected to anything).

Don't have any experience of the DDS.

Thats the eady bit Chris, even for the later bikes just pull it off the Bike wiring diagrams, its a bit harder when you get to the other end with 26 pins to choose from.
I'll probably end up taking it apart and seeing which pins are used, working out the Earth (Ov) pin shouldn't be to hard.
And if all else fails I'll try buying a lead for a Tecnomotor Socio 700, but that would cost about 6 times what I can make a lead up for


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  #6  
Old 18-Nov-2011, 19:43
chrisw's Avatar
chrisw chrisw is offline
Registered Forum User
500SD
Bikes: 999 Mono/1198S
 
Posts: 803
Join Date: Jun 2002
Mood: Messing with diagnostics
On the EOBD 16 pin connectors these are the only pins used

Pin4 - -ve grnd power supply
Pin5 - -ve grnd on 3 way superseal connector
Pin7 - KKL on 3 way superseal connector
Pin16 - +12v power supply



Don't know if that will help when you have 26 pins!
Quote+Reply
  
Thread Tools
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 15:08.