Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > P8

[M55Russ]

Can anyone supply me with a photo of a P8 and the wiring loom left hand side from the front of the bike. I have had my bike in bits over winter and I am re fitting the sub fame etc and it ain't going back how it came off. Help!!!.............. Don't say it I should of took a photo before I took it apart.

[M55Russ]

God loves a smart arse!
It's wasn't funny yesterday in the garage at -2 degrees. It's driving me nuts.
Your mood sums it up.................

[Edited on 30-12-2005 by M55Russ]

[M55Russ]

Best of luck bud. Both you and I will be looking forward to to a better year. All the best...........PLF branch

[M55Russ]

There's a beer, bacon butties or copious ammounts of tea to the first pic. from frustrated,angry man in small damp cold garage!!!!

[Edited on 30-12-2005 by M55Russ]

[nelly]

not a photo, but see if this helps???

[Harv748]

I was gonna post the same piccie!

What exactly is it you can't get right? I've just put my bike back together with a P8...so now would be a good time to ask.

[Harv748]

Here you go...from mine before it was stripped. Theres a couple of rogue wires in there from the quickshifter...but most should be identifiable.

I have actually routed them slightly differently on the rebuild in a bid to hide them a little better. Looks good at the moment, but we shall see when all the bodywork goes back on and none of it will fit!

[Harv748]

any use!?!?

[Harv748]

lastly

[Harv748]

I'll get there in a mo...just re-read your post and you say the left hand side from the front...I guess that means the clutch casing side, in which case you want these...