Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Speed Bleeders Mityvacs?

[Mark]

Ah, I've ordered the same M1keyp

[Mark]

By the way, when did you order these?

[khu996]

Their site lists the same for all Ducati

Anyone have some on their 749/999? Can you help with the model numbers?

[m1keyp]

Ordered on the 27th

Should anyone want the speed bleeders that I have for their rear caliper they are £ 5.00 each on ebay (I lose £ 1.00 on each after Paypal and Ebay charges ) One is listed here

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MESE%3AIT&rd=1

And the other here

http://cgi.ebay.co.uk/ws/eBayISAPI.d...MESE%3AIT&rd=1

[m1keyp]

The only consolation Flanks is that when yours arrive you will already have the others on the way

[Mr_S]

Looking at the difference betwen what you've got and what I've fitted, you can quickly check which you need based on the spanner needed to undo your current bleed nipples

If the rear uses a different size to the front (larger) then you need the 8125's

[Edited on 3-8-2005 by Mr_S]

[Mark]

I'll see what drops through the letter box first, no rush really. But thanks for the heads up,it could have been interesting had you not posted the differant sizes!

[Iconic944ss]

I've been told that good old PTFE thread tape on the nipples can help - sometimes even on the bike as well