Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Monsters > Rear Shock - Will a '99 583 fit a '05 620ie?

[domski]

I have a Nitron race shock fitted in a 1999 M600, will it fit in to a 2005 620ie Monster?

[AK]

This was to fit a loop arm susp - and will have a remote reservoir?
Dom - as long as the pre-load length is the same, I would think so.

AK

[skidlids]

If its about 305mm it may

[domski]

Thanks guys, I better ask Louigi to get his ruler out

[Chaz]

Originally posted by domski
I have a Nitron race shock fitted in a 1999 M600, will it fit in to a 2005 620ie Monster?

I hope so or it will have tobe the one off my pogo stick.

[domski]

Go and measure yours then. Sheesh, do I have to do everything???

Also, whilst your other bike is in bits, how long is that shock?

Throw me a fricking bone

[Chaz]

The ohlins off the 916 is 310 but i don't think it will fit.

[phil_h]

If you look on the ohlins website you can get all the shock dimensions.

The shock-mountings are different for the 2 different monster swingarms too.
It lists
305mm for 620 with an eye each end
330mm for 600 with an eye at the top and a fork at the bottom

[domski]

Bugger!!

[skidlids]

and a 916/996/998 Ohlins DU-143 is 305mm with a 71mm stroke