Fixing clip

aka.eric · 16-Feb-2006, 18:44

Does anybody have a pic of the fixing that holds these in place?Take it its a "rawplug" type that the screw goes into.

Jools · 16-Feb-2006, 18:49

Errr...Can't quite see what you mean, but it looks like you need some wellnuts

philthy · 16-Feb-2006, 19:23

Is that bit off the fairing? Looking at the hole size I would say that Jools is right.You may need the same fixings as the ones which hold your side panels on.

aka.eric · 16-Feb-2006, 19:26

The parts manual shows them as:-85040151A Insert
Wellnuts are shown as 036499020 M6
800063150 M5
Are you using wellnuts?if they work they will do for me.

philthy · 16-Feb-2006, 19:31

Still not sure where that bit goes.

Go on ...give us a clue

aka.eric · 16-Feb-2006, 19:46

Part no 23.

aka.eric · 16-Feb-2006, 19:52

Try it a bit smaller!

Rob B · 16-Feb-2006, 21:41

Mine has a small spring steel clip that slides over both edges of the panel. The 4mm fixing screw threds into that. Look at the fixings up on the headlight frame that hold the RH side panel, same I think. NLA from ducati though but Halfords do Odd Packs that have a very similar item. Do you want a pic?

Rgds, Rob

aka.eric · 16-Feb-2006, 21:45

Please,a pic is always handy.

phil911 · 16-Feb-2006, 21:58

Some T.8 1994 had red parts with a couple of nuts included in the plastic ...

Here's the black 1993 ...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

16-Feb-2006, 18:44	#1
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 Fixing clip Does anybody have a pic of the fixing that holds these in place?Take it its a "rawplug" type that the screw goes into. Reply

16-Feb-2006, 18:49	#2
Jools DSC Club Member BSB Star Posts: 6,930 Join Date: Jul 2002 Location: Bedfordshire Mood: MT Meglomaniac Errr...Can't quite see what you mean, but it looks like you need some wellnuts Reply

16-Feb-2006, 19:23	#3
philthy Registered Forum User Big Twin Posts: 1,028 Join Date: Jun 2005 Location: Wirral Mood: Can't make me mind up Is that bit off the fairing? Looking at the hole size I would say that Jools is right.You may need the same fixings as the ones which hold your side panels on. Reply

16-Feb-2006, 19:26	#4
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 The parts manual shows them as:-85040151A Insert Wellnuts are shown as 036499020 M6 800063150 M5 Are you using wellnuts?if they work they will do for me. Reply

16-Feb-2006, 19:31	#5
philthy Registered Forum User Big Twin Posts: 1,028 Join Date: Jun 2005 Location: Wirral Mood: Can't make me mind up Still not sure where that bit goes. Go on ...give us a clue Reply

16-Feb-2006, 19:46	#6
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 Part no 23. Reply

16-Feb-2006, 19:52	#7
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 Try it a bit smaller! Reply

16-Feb-2006, 21:45	#9
aka.eric Registered Forum User 500SD Posts: 651 Join Date: Jul 2004 Please,a pic is always handy. Reply

16-Feb-2006, 21:58	#10
phil911 Registered Forum User Mille Posts: 328 Join Date: Aug 2005 Location: FRANCE Mood: Privileged ... Some T.8 1994 had red parts with a couple of nuts included in the plastic ... Here's the black 1993 ... Reply