Quote:
Originally Posted by skidlids Somebody rewired it then or is the test meter leads connected wrong as normally the pumps Earth goes directly to earth and the 12 volt feed is supplied by one of the engine management relays with the status of the relay controlled by the ECU, the same relay should also put 12 volts on to the coils at the same time as putting it onto the pump |
Cheers Kev, I actually got that inf from ducati.ms. I've just made a temp harness which runs the pump on it's own. If it works when riding the bike it at least points me towards the wiring albeit from the relay's and or the ecu.
The biggest problem is i have to ride the bike for the problem to occur. Sitting the garage it's fine.