Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > 4 pad calipers

[aka.eric]

Seems to be general agreement that the 4pad calipers(P34?) are a good improvement,my fork legs have 40mm spacing(748)where can I buy the adaptors?
Any recommended suppliers for the calipers?,any other parts needed for the conversion.Theres a pair of Showa fork legs with 65mm spacing on ebay for £250.00 seller dukedemon,would they be a better bet than adaptors,any idea if they will fit a 98 model 748.

[Felix]

I'd agree with replacing the forks. You should be able to sell yours and hopefully spend the same or less as with the adaptors. Unless the forks are off an R or something, they should fit.

Oh, and before you put them on the bike, send them down to K-tech for a bit of fettling. Well worth it.

[Edited on 27-3-2005 by Felix]

[Jasper]

JHP.

http://www.ducatisportingclub.com/xm...5800#pid139774