| 916 Running Rough
Hi Can anyone help?
I own a 1995 Ducati 916 Biposta which has started to run a little rough, basically I had every electrical problem known to mankind which in the end resulted in me purchasing new regulator / rectifier and ECU as the old ECU kept blowing eprom chips. Anyway the new ECU has my standard chip installed even though I have 40mm Termi's fitted, I was informed by a Ducati expert that this would be ok? Anyway the acid question is, do I need to get the correct one? If so where from and where's best to go?
The current problem is the bike seems like it's ticking over too slow and needs revving as it won't idle for long without stalling
Any help is much appreciated
Martin | 
Threaded Mode