Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Sport Touring: ST4 / ST3 / ST2 > Rear spindle tool ?

[YMFB]

what tool is needed for the blunt end of the ST4S rear spindle, it looks like an enormous star driver ?

[moozaad]

not sure what you mean but I use a 30mm spanner to undo one end and then tube from the tool kit (+rubber hammer) to push my spindle out... it should just slide out with little to no force

[Edited on 9-5-2006 by moozaad]

[chrisw]

Only need a socket/spanner from one side. Then drift the spindle out.

[Derek]

Originally posted by YMFB
what tool is needed for the blunt end of the ST4S rear spindle, it looks like an enormous star driver ?

If you really feel that you need a tool for that end a 17mm hex is what you need. Can't say I've ever needed one myself.