Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 25-Feb-2005, 15:39
Real McCoy Real McCoy is offline
Registered Forum User
500SD
 
Posts: 537
Join Date: Jan 2004
57mm pipes

Iv currently got 54 mm termi system on the bike,Andy at Zorstec says he can alter my existing system to either 57 or 60mm.

What i was wondering is are all termi cans the same (ie 54/57mm) and is that the only difference ( the size of the pipes)

I know ill have to fit a power commander and set the thing up , But andy recon's it will only cost around £350 to alter the pipes

Or is there more to it than this
Quote+Reply
  #2  
Old 25-Feb-2005, 16:00
uncledunnie uncledunnie is offline
Registered Forum User
Mille
 
Posts: 262
Join Date: May 2003
Assuming you have 2-1-2 system 60mm will be a very very tight fit with a standard swing arm.

To exploit the full potential of the bigger pipes you would need to port the heads - not a requirement - but if your not going to do it theres no real need to buy the bigger diameter pipes other than pose value - think of it in terms of overall engine development rather than big pipes therefore big power, big pipes will accomodate more engine development than small pipes and therefore allow ultimately more power.

My S has 57's fitted and the heads ported and goes like stink with a PC3 and a custom map.

I could not say if the end box was the same or not, mines titanium tho' - bling!
Quote+Reply
  #3  
Old 25-Feb-2005, 16:01
dickieducati's Avatar
dickieducati dickieducati is offline
Registered Forum User
BSB Star
 
Posts: 5,018
Join Date: Jun 2003
Mood: the rain in spain falls mainly on me!
i think the cans are the same, just the pipe work is different.
dont honestly know how much difference you would get. my 's' with a 54 system is practically the same as andy b's 'r' with a 57. he has literally 2 more bhp at the peak but i actually have a bit more lower down. torque is comparable.
if you wanted to see the charts they are on the board somewhere. will try to find the link.
Quote+Reply
  #4  
Old 25-Feb-2005, 16:13
Real McCoy Real McCoy is offline
Registered Forum User
500SD
 
Posts: 537
Join Date: Jan 2004
Quote:
Originally posted by dickieducati
i think the cans are the same, just the pipe work is different.
dont honestly know how much difference you would get. my 's' with a 54 system is practically the same as andy b's 'r' with a 57. he has literally 2 more bhp at the peak but i actually have a bit more lower down. torque is comparable.
if you wanted to see the charts they are on the board somewhere. will try to find the link.

Is your S standard other than the pipes, Sound's quite impressive
Quote+Reply
  #5  
Old 25-Feb-2005, 16:27
dickieducati's Avatar
dickieducati dickieducati is offline
Registered Forum User
BSB Star
 
Posts: 5,018
Join Date: Jun 2003
Mood: the rain in spain falls mainly on me!
yes standard engine, just the 54 system with power commander.
Quote+Reply
  #6  
Old 25-Feb-2005, 18:03
andyb's Avatar
andyb andyb is offline
Registered Forum User
BSB Star
 
Posts: 6,720
Join Date: Feb 2002
Mood: Has change happened...must of missed it!
Oiy!

Thats cos yer mate j spent a bit more time on yours cos u r a riding god!
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 06:30.