termi gaskets ??

Glyn · 05-Jul-2009, 14:07

termi is blowing at the first joint from the rear cylinder. popped over to jhp and got this
http://www.ducatisportingclub.com/at...d=12467989 41
the one jhp have supplied is way to big anyway

took the exhaust off this morning and none of the joints have a gasket of any sort.

http://www.ducatisportingclub.com/at...d=12467991 11
should they have a gasket ??

Ghost · 05-Jul-2009, 14:39

Yes all the joints should have a gasket, they are around £5 each, one large diameter and three the same smaller diameter.

Glyn · 05-Jul-2009, 15:02

thanks ghost
just to clarify this is the full 2 into 1 into2 54 mm system

Ghost · 05-Jul-2009, 15:07

My system is the asym one but a slip joint requires a seal regardless, or it will suck in air giving popping on the overrun and blow also.

KeefyB · 09-Jul-2009, 07:19

Did you get it sorted mate?

Glyn · 09-Jul-2009, 18:53

yep all back together and no gaskets. just a bit of exhaust sealant.

matty · 11-Jan-2010, 11:16

my full system has no gaskets and no back firing???

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

05-Jul-2009, 14:39	#2
Ghost Registered Forum User Big Twin Bikes: Ducati 749, Phil Read Replica, DD 620 Posts: 1,830 Join Date: Mar 2008 Location: Coventry Mood: 2011 DD Class 'B' Champion Yes all the joints should have a gasket, they are around £5 each, one large diameter and three the same smaller diameter. Reply

05-Jul-2009, 15:02	#3
Glyn Registered Forum User Ducati Meccanica Posts: 2,505 Join Date: Sep 2003 Location: lost in space Mood: st2......we can rebuild thanks ghost just to clarify this is the full 2 into 1 into2 54 mm system Reply

05-Jul-2009, 15:07	#4
Ghost Registered Forum User Big Twin Bikes: Ducati 749, Phil Read Replica, DD 620 Posts: 1,830 Join Date: Mar 2008 Location: Coventry Mood: 2011 DD Class 'B' Champion My system is the asym one but a slip joint requires a seal regardless, or it will suck in air giving popping on the overrun and blow also. Reply

09-Jul-2009, 07:19	#5
KeefyB Registered Forum User WSB Hero Posts: 7,600 Join Date: May 2002 Location: The Fens. Mood: Lurkin'..... Did you get it sorted mate? Reply

09-Jul-2009, 18:53	#6
Glyn Registered Forum User Ducati Meccanica Posts: 2,505 Join Date: Sep 2003 Location: lost in space Mood: st2......we can rebuild yep all back together and no gaskets. just a bit of exhaust sealant. Reply

11-Jan-2010, 11:16	#7
matty Registered Forum User Posts: 2 Join Date: Jan 2010 my full system has no gaskets and no back firing??? Reply