Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Monsters > Can anyone help with this...

[Mr C]

Its the plastic (Alloy on older models) Nut that holds in the fuel level sensor up in to the Tank on a Monster. I've managed to split mine. Tried various avenues to try and get one. Dont really want to have to go buying the whole new unit just for a Nut. So if anyones got a Monster tank sitting around with the level sensor on id be happy to send some Shillings your way





[Edited on 18-9-2005 by Mr C]

[NBs996]

Can't help with the right part, but that looks suspiciosly like an ordinary ptfe compression nut available in plenty from plumbing merchants.

[Mr C]

Originally posted by NBs996
Can't help with the right part, but that looks suspiciosly like an ordinary ptfe compression nut available in plenty from plumbing merchants.

Tried that but the thread on mine is to tight

[tranquil_rage]

I might be able to help. I have an older monster but recently had to buy a new unit myself as the fuel warning sensor wires had sheared off inside the insulation!

I'll check the mounting nut spare when I'm next home (afraid its 15th December so a bit of a wait). If the older monster has a similar nut then I'll send it to you for free.

If thats too long a wait let me know.