Quote:
Originally posted by Fastfasulli Hi, I wonder if anyone can help. I want to buy a torque wrench and sockets for my 1995 monster tat I'm entering into the DD races this year. I have no manual with the bike. Can anyone advise a non mechanic as to whether I would need a 1/2 inch wrench or a 3/8 - and what LB'age wrench I should be looking for. Many thanks Franco |
Nip down to your local tool store/Halfords and get yourself a decent 1/2inch socket set.Make sure it has the bigger sockets in there,like 22,28mm for wheel spindles,etc.While you are at it,buy a rail of 1/2 inch drive Allen keys.(Ideal when removing calipers,handlebars and stuff).
I bought my torque wrench from Argos for about £14.Its range is 28-210nm.Its pretty crude,but it does what I want,again,Halfords or somewhere also have these.
I think you can download a monster manual here;
www.duc.nu/manuals/ Good luck.