Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > cut out

[duc daz]

was out on my 999 saturday .....when i aproached a t junction it cut out started back up ok .went further down the road come to stop did the same ........ called at the local shop .got back on the bike went down the same stretch of road and it was fine ..no fault showed up . are all 999 like this ???????????

[Twinfan]

Dunno, but 749S's can be...

[The Big Red One]

how many miles on it?

[duc daz]

Originally posted by The Big Red One
how many miles on it?

1000miles

[Twinfan]

Might still be a bit tight then. Some bikes seem more prone than others. If it happens quite a bit, get it checked. You don't want an accident because of it.

[KeefyB]

Yeah,they do that sometimes.
The injection does need setting up carefully.

[DaveO749R]

Please don't start me on this one grrrrrrrrrrr my 749R has again just been transported back to the supplying dealer after months of trying to sort it out.

It was returned to me mid jan after nearly 3 months away only to be worse than it was when it went away.

I have had to employed a solicitor to ensure this is resolved fairly I'm hoping to discuss and agree a resolution next week when they have looked at the bike again but I have lost faith and want to reject the bike on the ground of unfit for purpose.

Everybody on hear has suggested a fix but trust me my bike todate has had all the fixes without success.


Regards

[The Big Red One]

Sounds normal to me. Tell Ducati and they should check the ECU air fuel mix. Mine did the same until the first service

[duc daz]

ive just had termis put on and the race ecu.im getting back fire as well in first gear roll on roll

[Twinfan]

Cam timing and CO2 needs checking/setting up IMHO.