Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-Feb-2004, 13:21
Lloydy Lloydy is offline
Registered Forum User
Bevel Head
 
Posts: 91
Join Date: May 2003
More sprocket questions!!!

Right, phoned B&C and they have now sent through the correct front sprocket. Fitted this easily, now trying to fit the rear carrier and new sprocket, so have taken the old one off, but cannot undo the carrier bolts, the bolts just turn..

Have realised that I need something in the other end to stop this, do you know what fits? I dont seem to have anything..

Sorry it is vague, but I hope you can guess what I mean.

Cheers

Lloydy
Quote+Reply
  #2  
Old 03-Feb-2004, 13:35
nelly's Avatar
nelly nelly is offline
Registered Forum User
Ducati Corse
 
Posts: 3,134
Join Date: Jan 2002
Mood: Bloo and Yellow.. and Red now ;)
You can usually get away without removing the cushdrives.
Remove the big circlip from the back of the carrier assembly and the washer, then tap the sprocket off the carrier.
Grease the cush drives a little.
The Renthal carrier should then slip back on, might need a little tapping to get it to seat correctly. Fit the washer and circlip and you're done.
If you do need to remove the cushdrives, you'll need a 12mm allen key.
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 13:47.