Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 29-Aug-2006, 17:01
daniel_keenan_2004's Avatar
DSC Region Organiser daniel_keenan_2004 daniel_keenan_2004 is offline
Regional Organiser - Lincolnshire
Bevel Head
 
Posts: 85
Join Date: Aug 2006
Mood: chilled
749 Juddering/vibration

Under braking i get a juddering sensation from the front end, dont think its anything to do with the brakes, i suspect its the mirror supports bouncing up and down. Does anyone else suffer from this? Could it need a little suspension setup, it has only done 700 miles! cheers
Quote+Reply
  #2  
Old 29-Aug-2006, 17:28
Monty's Avatar
DSC Member Monty Monty is offline
DSC Club Member
Ducati in my Blood
Bikes: 1100S Multistrada, 450RT, Gilera Nordwest, Bultaco Frontera, Rickman Metisse-being built!
 
Posts: 4,255
Join Date: Jun 2001
Mood: Growing old-DISGRACEFULLY!
If you can feel it through the bars it is probably warped disks, or glazed pads-get your dealer (Italia?) to check it. The vibration I suspect is what is causing the mirrors to wobble.

John


Growing old-disgracefully!
Quote+Reply
  #3  
Old 29-Aug-2006, 17:33
butch890 butch890 is offline
Registered Forum User
Big Twin
 
Posts: 1,602
Join Date: Jun 2003
Mood: Enjoying Togdom !
there is a recall on some models for new banjo bolts on the calipers to cure just this problem,not sure if it applies to 749's
Butch
Quote+Reply
  #4  
Old 29-Aug-2006, 17:43
daniel_keenan_2004's Avatar
DSC Region Organiser daniel_keenan_2004 daniel_keenan_2004 is offline
Regional Organiser - Lincolnshire
Bevel Head
 
Posts: 85
Join Date: Aug 2006
Mood: chilled
cheers guys, its got its first service tomorrow so i will see what they say! it doesnt happen all the time and is only with medium braking! curious!
Quote+Reply
  #5  
Old 29-Aug-2006, 18:20
Carbon749's Avatar
Carbon749 Carbon749 is offline
Registered Forum User
Big Twin
 
Posts: 1,956
Join Date: Mar 2005
Mood: I own a flame thrower
Had two 749 and on both bikes I've had the bolts that hold the headlight casing to the head stock come loose. Before I spotted the problem first time I actually lost 2 of the 4 bolts

The top fairing, mirror supports, mirrors, clocks, fuse box, headlights etc all mount to the big heavy headlight casing and this is only held to the head stock with 4 off M6 bolts.

If these come loose all the front end body work etc can feel loose.

First thing I do now is fix these bolts in place with a drop of loctite threadlock.

Easy and cheap fix.
Quote+Reply
  #6  
Old 29-Aug-2006, 19:07
KeefyB KeefyB is offline
Registered Forum User
WSB Hero
 
Posts: 7,600
Join Date: May 2002
Mood: Lurkin'.....
Quote:
Originally Posted by Monty
If you can feel it through the bars it is probably warped disks, or glazed pads-get your dealer (Italia?) to check it. The vibration I suspect is what is causing the mirrors to wobble.

John
Agree with Monty,warped discs.
Marko had the discs on his 749 replaced under warrenty.Nip over to Italia and get them to check it out.
Quote+Reply
  #7  
Old 31-Aug-2006, 16:58
daniel_keenan_2004's Avatar
DSC Region Organiser daniel_keenan_2004 daniel_keenan_2004 is offline
Regional Organiser - Lincolnshire
Bevel Head
 
Posts: 85
Join Date: Aug 2006
Mood: chilled
Had its first service yesterday, the mechanic at italia isnt quite sure what it it is, however he thinks it could be the discs, im going to give them a few hundred more miles just to be sure they have fully bedded in, if that fails they will fit a new set of discs. Cheers for the imput guys.
Quote+Reply
  #8  
Old 31-Aug-2006, 22:41
final_edition's Avatar
DSC Member final_edition final_edition is offline
DSC Club Member
Big Twin
 
Posts: 1,918
Join Date: Jan 2006
Mood: Having some tinnies and a barbie
Check to see if the front tyre has gone "out of round"
Quote+Reply
  #9  
Old 31-Aug-2006, 22:51
mark749s's Avatar
mark749s mark749s is offline
Registered Forum User
Mille
 
Posts: 198
Join Date: Aug 2005
its not flat is it

Mine had new discs under warranty at the 12000 mile service they were warped.

Mark
Quote+Reply
  #10  
Old 01-Sep-2006, 13:58
gordonparker's Avatar
gordonparker gordonparker is offline
Registered Forum User
Big Twin
 
Posts: 1,277
Join Date: Oct 2005
I also had a problem after 3,000 mile with a judder from 65-59mph when braking, it was suggested that it was the tyre as the discs semmed Ok with very little run out, the tyre did show signds of not running true.
Tyres replaced, still the problem but not as bad. Neil at Cornerspeed checked the discs and the discs were in spec, however following a short run on the bike he agreed it was a problem. DUC say the banjo problems does not apply to the 999/749 but they have agreed to replace both discs and pads.
I will be having these fitted next week and will keep you posted on the results
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 05:28.