Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > 748 clutch fitting question (help)

[flanagaj]

Hi,

Just fitting my new clutch basket and plates and I notice that the plain plates have a notch cut out and I was wondering whether they need to be aligned or should they be staggered to ensure even weight distribution.

Any help appreciated.

Thanks


Justin

[flanagaj]

Surely someone has fitted a clutch themselves !!

[jon_m3]

i did mate but i cant for the life think of what your describing

[Jasper]

Doesn't matter which way they go in.The only important one is the dished plate(got a dot punch on it).That must go in the correct place.

[skidlids]

Yep as Jasper says don't worry about the ickle cut outs I put them all over the place.

As Jasper says just make sure the dished plate is in the right place and the correct way round

[flanagaj]

Originally Posted by jon_m3

i did mate but i cant for the life think of what your describing

Each of the non friction plates has a small semi circular notch cut out of the outer edge.

But as the later posts have said. No need to align these.

Thanks Chaps !!