Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
Prev   Next
  #1  
Old 26-Apr-2016, 20:18
dunlop0_1's Avatar
dunlop0_1 dunlop0_1 is offline
Registered Forum User
Big Twin
 
Posts: 1,568
Join Date: May 2009
749 Swinging arm in M750

Having recently purchased a M750 I have now completely stripped the bike to its component parts in readiness for a complete rebuild including some modern extras.

One of these updates is to fit a 749 swinging arm and suspension to the bike, now I am not unfamiliar to fitting things that are not meant to fit and my plan is to keep the forum updated for those of you who are interested in this sort of thing.

The to do list so far and a few pictures.

1, Machine casings to accept 749 swinging arm
2, Chain alignment is slightly out and this can be overcome by using the bush/spigot I made in the pictures or fitting the later output shaft which is longer
3, Re locate and adapt the frame suspension mount
4, Replace crank casing needle roller bearings with solid bushes as the bearings will be in the swinging arm.
5, The rear wheel alignment is fine but there are number of spacer/bearing and caliper mounting issues to overcome.





Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 22:55.