Out on Monday for a ride and the speedo has suddely stopped working and the milo/trip has also stopped. I guess it is cable operated but a (though) normally the speedo swings wildly or bounces if the cable goes. Any ideas? or is it off to Ducati Leeds for wallet session? Thanks in advance etc...
the cable may have snapped, quite common as the attachment near the front wheel often gets spun round .... have a look ... new cables are cheap froma dealer anyhow
I bought it from eBay under the assumption that Ducati would probably use exactly the same part number cable for all bikes (like they do the speedo drive). Unfortunately the cable for 748/9**'s is shorter than I need for my ST
I got it for a fiver, you can have it for the same plus P&P if you want it.
might be the drive on the front wheel cos for some reason when built they are dry. and the full drive is only just over twenty pounds but like others have said go for the cable first.
Check the plastic speedometre drive gear unit on the axle. My unit got cracked, either from an improper installation during a tyre change or from road debris impact.