Power commander on 888

Jasper · 05-Jan-2006, 10:25

Has anybody fitted a Power commander to there 888?If so,are the connectors the same or do you have to chop the wiring loom about?

nelly · 05-Jan-2006, 10:40

Jasp, there's no specific unit for the 888 i'm afraid. The problem now is that the units know which bike they are meant for so will only accept maps that suit the application they are fitted to.
I'd give DynoJet a call directly and have a word with them. They may be able to do a special?? They are pretty helpful. 01995 600500

Jasper · 05-Jan-2006, 10:44

Cheers mate

Rob B · 05-Jan-2006, 10:47

I'm sure one from a 996 SPS would fit, same ECU and injector set up?!?!?

[Edited on 5-1-2006 by Rob B]

Jasper · 05-Jan-2006, 10:49

Just spoken to Dynojet.Any of the 748/916/998 power commanders will fit.Just that there is no standard fuel map to download so it will need setting up at a Dynojet centre.This is not a problem,as i have one 10m up the road!!

Rob B · 05-Jan-2006, 10:51

http://intobikes.co.uk/products?deta...l=0429&src=fro

Ducman851 · 05-Jan-2006, 16:11

Or you can just get a proper FIM chip done and be finished with it, and no extra stuff to hide on the bike.

http://www.fuelinmoto.com.au/

[Edited on 1-5-2006 by Ducman851]

Jasper · 05-Jan-2006, 16:18

they don't do one for the SP5.It has twin injectors.

mikesps · 05-Jan-2006, 16:23

I have a Megazone copy of the standard SP5 chip from FIM. It can be tuned using the FIM software, but is not optimised.

Jasper · 05-Jan-2006, 16:39

Thanks all,

I have got a Pc111,so will see what a dyno session plus my spaghetti(when i actually finish it!) do.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

05-Jan-2006, 10:25	#1
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Power commander on 888 Has anybody fitted a Power commander to there 888?If so,are the connectors the same or do you have to chop the wiring loom about? Reply

05-Jan-2006, 10:44	#3
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Cheers mate Reply

05-Jan-2006, 10:47	#4
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy I'm sure one from a 996 SPS would fit, same ECU and injector set up?!?!? [Edited on 5-1-2006 by Rob B] Reply

05-Jan-2006, 10:49	#5
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Just spoken to Dynojet.Any of the 748/916/998 power commanders will fit.Just that there is no standard fuel map to download so it will need setting up at a Dynojet centre.This is not a problem,as i have one 10m up the road!! Reply

05-Jan-2006, 10:51	#6
Rob B Registered Forum User Ducati Meccanica Posts: 2,263 Join Date: Aug 2003 Location: Wimbourne, Dorset Mood: I'm so happyyyyyyyyyyyy http://intobikes.co.uk/products?deta...l=0429&src=fro Reply

05-Jan-2006, 16:11	#7
Ducman851 Registered Forum User Montjuic Posts: 77 Join Date: May 2005 Location: Temecula, California, USA Mood: Just Ducky Or you can just get a proper FIM chip done and be finished with it, and no extra stuff to hide on the bike. http://www.fuelinmoto.com.au/ [Edited on 1-5-2006 by Ducman851] Reply

05-Jan-2006, 16:18	#8
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK they don't do one for the SP5.It has twin injectors. Reply

05-Jan-2006, 16:23	#9
mikesps Registered Forum User Mille Posts: 235 Join Date: Jan 2005 Location: Kuala Lumpur I have a Megazone copy of the standard SP5 chip from FIM. It can be tuned using the FIM software, but is not optimised. Reply

05-Jan-2006, 16:39	#10
Jasper Registered Forum User Ducati Corse Posts: 3,707 Join Date: Jun 2002 Location: YORK Thanks all, I have got a Pc111,so will see what a dyno session plus my spaghetti(when i actually finish it!) do. Reply