ROCKER WEAR 916 BIPOSTO My old 916 is in for service at 26000 miles thrashed bashed and generally abused, I specifiacly asked Mike to pull the cams and check the rockers as Annettes sps needed 2 even though the engine was rebuilt 18 months ago. Only one shim needed changing the cams and rockers were perfect!! I do service it at the specified intervals but to have no wear on the cams and rockers, perfect compresion etc defies all the recent posts on this and many US sites. Can anyone (shazzam) explain, I am not complaining, But perhaps the fact the bike is used regulaly even though it is a spare could be a contributory factor. Now to get the bodywork repaired and it will look as well as run like new. stunned and better off than expected dave:: |