Immobiliser 1098

Cts3411 · 10-Mar-2012, 20:37

Washed my bike no different than before and I have now a fault any advice welcome. Thank you

Dukeman358 · 10-Mar-2012, 21:13

I suffered the same problem and despite the garage checking it a few times never really resolved! Needed to remember the code number in order to start it on more than one occasion.

chrisw · 10-Mar-2012, 21:30

Unlike earlier bikes the immobiliser for the 848,1098,1198 sits within the speedo not the ECU.

Possible water ingress on the connector to the speedo or even to the antenna around the ignition lock?

I have read about water being trapped between the antenna and the plastic shroud stopping the key being read. Drying it all off cured it.

http://www.ducati.org/forums/1098-11...zer-error.html

Cts3411 · 11-Mar-2012, 08:07

Thank you , turned the workshop heating up full all night , a quick squirt of wd40 later and hopefully all will be sorted.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

10-Mar-2012, 20:37	#1
Cts3411 Registered Forum User Bikes: Ducati Posts: 2 Join Date: Jan 2012 Location: Lincoln Mood: Wasby ! Immobiliser 1098 Washed my bike no different than before and I have now a fault any advice welcome. Thank you Reply

10-Mar-2012, 21:13	#2
Dukeman358 Registered Forum User 500SD Bikes: 899 Posts: 609 Join Date: Jul 2007 Location: Andover Hampshire Mood: Optomistic I suffered the same problem and despite the garage checking it a few times never really resolved! Needed to remember the code number in order to start it on more than one occasion. Reply

11-Mar-2012, 08:07	#4
Cts3411 Registered Forum User Bikes: Ducati Posts: 2 Join Date: Jan 2012 Location: Lincoln Mood: Wasby ! Thank you , turned the workshop heating up full all night , a quick squirt of wd40 later and hopefully all will be sorted. Reply