Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 13-Dec-2003, 15:03
Totto Totto is offline
Registered Forum User
Big Twin
 
Posts: 1,262
Join Date: Jul 2002
Mood: Not so broke any more !!!!!!!!
Exhaust clearance for BP !

What clearance do you have Betwween the Right side (sitting on) rear footrest hanger lugs & the right exhaust pipe !
After fittng my Termi's i have only got around 2mm of clearance
Quote+Reply
  #2  
Old 13-Dec-2003, 15:19
nelly's Avatar
nelly nelly is offline
Registered Forum User
Ducati Corse
 
Posts: 3,134
Join Date: Jan 2002
Mood: Bloo and Yellow.. and Red now ;)
Doesn't sound too far off the mark, especially if you've gone to a bigger OD. The bigger pipes are usually intended to go on to a bike with a mono subframe so the lugs wouldn't be there.
You could tap the pipework a little with a rubber mallet to "settle" things down a little and maybe free up a little more clearance, but if it aint toucjing you'll be fine.
Quote+Reply
  #3  
Old 13-Dec-2003, 15:30
Totto Totto is offline
Registered Forum User
Big Twin
 
Posts: 1,262
Join Date: Jul 2002
Mood: Not so broke any more !!!!!!!!
Oops forgot to add they are 45mm's ( Race) same as STD but are Fro my track bike
I would not be using them on my ROAD BIKE as this would not leagal , nudge nudge wink wink !

[Edited on 13-12-2003 by Totto]
Quote+Reply
  #4  
Old 13-Dec-2003, 15:48
nelly's Avatar
nelly nelly is offline
Registered Forum User
Ducati Corse
 
Posts: 3,134
Join Date: Jan 2002
Mood: Bloo and Yellow.. and Red now ;)
I've got a 996 in here at the moment, with BP subframe and 45 Termis on. There is 4mm of clearance.
They could well "settle" a little once they are hot and the springs pull a little ???
Quote+Reply
  #5  
Old 13-Dec-2003, 16:03
Totto Totto is offline
Registered Forum User
Big Twin
 
Posts: 1,262
Join Date: Jul 2002
Mood: Not so broke any more !!!!!!!!
Thanks Nelly , have got around 4mm now , the "race Termi's" seem to take a slightly different angle to the back , when i put the std pipes back on the clearance was not a problem
Will run it till hot then give the pipes a little help to move ( hammer)
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 17:57.