| Clip On - New Source - Fit SS too
I thought some of you might be interested in these. They where supplied by Baines racing as they are using them for their Imola project. These where specials to fit the 51mm Ohlins (Bling) but the standard versions are 50mm for the Showas.
They are half way between the standard high rise and the flat aftermarket versions from Harris and the like; a good compromise in my view. They are also slightly longer than stock so allow a little more room to accommodate the switchgear. A good thing if you've fitted a Brembo radial m/c.
Rgds, Rob
[Edited on 28-1-2006 by Rob B] | 
Linear Mode
