Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > Monsters > What carbs do I have in my 99 Monster 600?

[Tonio600]

I know they're Mikuni ones but don't have a clue about what model...

[antonye]

Same as all the carbed 2v bikes!

It's in the Haynes manual...

[Tonio600]

I'm sure that's in the Haynes manual but I was hoping somebody would know it by heart and so I could give a call to Allen Performance now...

[domski]

38mm Mikuni's isn't it? (according to Ducati.com)

I don't know anything else.

Have you phoned Louigi? He may have something, and will definately know the answer... www.louigimoto.co.uk

[Tonio600]

that's fine Dom, I'll have a look at the carbs tonight at home. It's just that I would have liked to call them today... nevermind.

[antonye]

Same as the Yamaha TDM - "38mm CV Mikuni"

Isn't Google fantastic?

[Tonio600]

Message original : antonye
Same as the Yamaha TDM - "38mm CV Mikuni"

Isn't Google fantastic?

I searched but couldn't find the information, cheers mate.

(but don't forget that it's much easier to find something pertinent with Google when English is your mother tongue... I always run my searches in French hence the outcome ).

[monstermob 998]

if they are the same as the 600 SS

mikuni BDST 38 B156
main jet==132.5
main air jet==70
jet needle==5CJ 1 (3pos from top)
needle jet==Y-6
throttle valve==130
pilot jet==37.5
By pass holes==0.8/1.0/0.8
valve seat== 1.7
piston valve holes==2 holes1.5 centers
piston spring--730- 10026

[Tonio600]

thanks mate, I received a brand new Diaphragm 2 days ago. Allen's Performance are the ones...