a good direction re setting front rear sag, then phase 2, setting the forks on 4th ring and length of ride height bar to 285mm. Ive done this today, will see what its like.....
Well hats off to them!! Free info that is often very hard to come by, and im impressed. It does exactly what it says on the tin, a much better feel on the front!!
i checked my suspension and found i had 24 clicks of rear compression! all the setting were at least 2 to 3 clicks from supposed factory settings! my advice check them!
Chillo, raise your forks through to the 4th ring. Measure the rear tie bar to 285mm. Do you sag first to 35front 30 rear. check your damping and wehey!
all the setting were at least 2 to 3 clicks from supposed factory settings! my advice check them!
Linear Mode
