Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > Pipes - what's available?

Originally posted by nathanhu
just dont bother buying a 57mm ti system from termi just yet as the end boxes are pants ive just snapped my third and that one lasted only 2 days !!!!!!!!!!!! and they know about the problem but keep on shipping out the old stuff first.....

Interesting..............I've got the 57MM system which I've had for 5 months/2500KMS and I've had no problems.

Who's doing the fitting for you?

Mine'll probably break now

[Rick_916]

Sil motor looks nice and sounds good

[Rick_916]

a better pic

[tongpo]

the best i've seen- from a japan website, with conversion to USD it's about 4K usd....way exp. considering the full termi is about 3k here

http://www.motocorse.net/homeing.asp
about 400000yen, though the japan site says it's availible, this euro site says it's coming soon..*shrug* looks f'ing pimp!







[Edited on 6-6-2004 by tongpo]

[Edited on 6-6-2004 by tongpo]

[Twinfan]

That Sil Motor is nice - any idea who stocks them in the UK????

[pj748r]

on e-bay at moment
http://cgi.ebay.co.uk/ws/eBayISAPI.d...4423 303&rd=1

and

http://cgi.ebay.co.uk/ws/eBayISAPI.d...5104 903&rd=1

and

http://cgi.ebay.co.uk/ws/eBayISAPI.d...5258 619&rd=1

hope this helps

PJ

[yellowisfriedegg]

Originally posted by pj748r
on e-bay at moment
http://cgi.ebay.co.uk/ws/eBayISAPI.d...4423 303&rd=1

and

http://cgi.ebay.co.uk/ws/eBayISAPI.d...5104 903&rd=1

and

http://cgi.ebay.co.uk/ws/eBayISAPI.d...5258 619&rd=1

hope this helps

PJ

The stuff shown in the first photo is a standard system

The second one looks kosher.

The 3rd one sounds like an assymetric system.

Beware , the race ECU is different for each different model of 749 and 999 , also , if the race supplied ECU has been fitted to a bike (even if only for 600 miles as stated in the 3rd ad , it wouldn't matter if it was 6 miles or 6000 miles) that ECU will not work now on any other bike other than the first one it was fitted to (Ducati Uk know about this problem) , you will have to either buy a replacement ECU (£450 ish) or run the system with the standard ECU , you then get the noise but possibly not the full BHP gains that you might get by running the pipe with the correct race ECU

[Jools]

Well that Tubistyle system shouldn't have problems with heat build up if it's made of Inconel.

In a previous life I worked as a salesman for a specialist metal stockholder (would've been handy now with access to as much titanium tube or sheet as I want), anyway Inconel is a high heat nickel alloy usually found in jet engines, as far as I remember, so it should last forever. Mind you it was 25 years ago and copious quantities of Stella have destroyed the odd brain cell since then so my memory might not be spot on.

[Edited on 14-6-2004 by Jools]