Little dribble

748IOM · 06-Aug-2005, 13:43

Found a little dribble of oil around my oil filter, does it sound like it just needs nicking up a bit?

Doesn't drip it just weeps a bit, I've wiped it clean but it returns.

Loz · 06-Aug-2005, 13:51

No expert here, thankfully someone will be along soon.

IMO, it would be useful to know the state of the filter o-ring, whether it was located/lubricated properly when it was fitted.

This would need careful watching if you don't decide to investigate thoroughly, as oil on the back tyre does nothing good for grip (although it would be excellent for learning how to "back-it-into-corners").

Mark · 06-Aug-2005, 14:05

It never hurts to be sure, get some new oil and new oil filter, and whip the filter off. I had this on the zzr, it turned out the seal had broken.

If you do take it off, check the housing it screws into, and the thread.

[Edited on 6-8-2005 by Flanks]

NBs996 · 06-Aug-2005, 14:08

Could be just not done up properly, but for a new filter and seal you'll get change from a tenner.

748IOM · 06-Aug-2005, 14:19

OK I assume it doesn't really matter how often you change your oil? Is there a bit of "run it gently period" after changing the oil?

Does the seal come with the replacement filter?

Lastly do I need a special tool for removing and replacing an oil filter. Quick look in the Haynes Manual suggests I do. Is it universal and easy to come by?

Thanks again

marksduc748 · 06-Aug-2005, 14:32

they come off easy enough with out a tool. and yep the O ring comes with the new filter.

NBs996 · 06-Aug-2005, 15:09

Remove the old filter by whatever violence is deemed necessary. If you've not got the right tool then stick it with a screwdriver.

For the new filter, when you stick it in don't forget to lube up your ring.

[Edited on 6-8-2005 by NBs996]

Loz · 06-Aug-2005, 15:46

I use a strap wrench from B&Q - works for me.

Also useful for removing the oil filter!

WeeJohnyB · 06-Aug-2005, 21:38

I thought a post entitled 'Little Dribble' was going to be some rude photo of one of our more colourful members

WeeJohnyB

06-Aug-2005, 22:29

Quote:

Originally posted by WeeJohnyB
I thought a post entitled 'Little Dribble' was going to be some rude photo of one of our more colourful members

WeeJohnyB

Oh dear ... I thought the same ...

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

06-Aug-2005, 13:43	#1
748IOM Registered Forum User 500SD Posts: 508 Join Date: Jul 2005 Location: Isle of Man Mood: Yellow!! Little dribble Found a little dribble of oil around my oil filter, does it sound like it just needs nicking up a bit? Doesn't drip it just weeps a bit, I've wiped it clean but it returns. Reply

06-Aug-2005, 14:05	#3
Mark Registered Forum User BSB Star Posts: 6,397 Join Date: Jul 2002 Location: Fareham, Hampshire It never hurts to be sure, get some new oil and new oil filter, and whip the filter off. I had this on the zzr, it turned out the seal had broken. If you do take it off, check the housing it screws into, and the thread. [Edited on 6-8-2005 by Flanks] Reply

06-Aug-2005, 14:08	#4
NBs996 Registered Forum User Ducati in my Blood Posts: 4,728 Join Date: Sep 2003 Location: The deep south Mood: I love my 996 xxx Could be just not done up properly, but for a new filter and seal you'll get change from a tenner. Reply

06-Aug-2005, 14:32	#6
marksduc748 Registered Forum User GTL Posts: 410 Join Date: Mar 2004 Mood: me in a mood? NEVER! they come off easy enough with out a tool. and yep the O ring comes with the new filter. Reply

06-Aug-2005, 15:09	#7
NBs996 Registered Forum User Ducati in my Blood Posts: 4,728 Join Date: Sep 2003 Location: The deep south Mood: I love my 996 xxx Remove the old filter by whatever violence is deemed necessary. If you've not got the right tool then stick it with a screwdriver. For the new filter, when you stick it in don't forget to lube up your ring. [Edited on 6-8-2005 by NBs996] Reply

06-Aug-2005, 15:46	#8
Loz Registered Forum User Big Twin Posts: 1,973 Join Date: Apr 2004 Location: West Sussex Mood: Train comes and I know its destination I use a strap wrench from B&Q - works for me. Also useful for removing the oil filter! Reply

06-Aug-2005, 21:38	#9
WeeJohnyB Registered Forum User Big Twin Posts: 1,993 Join Date: Jun 2001 Location: Herts Mood: Channel Swim is now a (bad) memory not a dream I thought a post entitled 'Little Dribble' was going to be some rude photo of one of our more colourful members WeeJohnyB Reply