Quote:
Originally Posted by 9rrr Hi all. Im to be the proud owner of a pair of DYMAG 5 SPOKE CARBON WHEELS. Ive splashed out and am going to purchase some Brembo discs. My question is, what studs do you lot reccommend I use to fit the discs to the wheels. OE ones from Ducati, Titanium albeit my mate sheared the heads off his, or something else. Thanks Ian. |
The problem is the internal drive surfaces (inhex) on the Pro Bolt UK brand of titanium bolt, extend into the shank under the head, thus reducing the material section to a little over 1mm radially; this is the reason for the bolt head failure- poor design these bolts are potentially dangerous and I notice after my complaint they have brought out a alternative design which is simillar to the NCR design.
Only buy titanium disc bolts with external hex drive (like a standard bolt not like a cap screw) because disc bolts have by neccessity very short heads that dont need to be weakened by inhex drive that extends into the shank