Ducati Sporting Club UK
DesmoDue Parts For Sale & Wanted
This section is for all your DesmoDue race parts, accessories and the like.
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 12-Feb-2012, 12:06
848spence's Avatar
848spence 848spence is offline
Registered Forum User
Mille
Bikes: Ducati 848 and 583 dd race bike
 
Posts: 285
Join Date: Apr 2011
Ses rear sets

Right here is my bike and here is my problem...


I bought these rear sets thinking they were for a monster but now they are on an fitted are really high and do not conform to acu regs. I have spoke to few people and they say they are for the SS.Was going to start making some adjuster plates up this week but before i waste some time does anyone have any that would like to swap? or sell? I would only need the actual part that bolts to frame.
many thanks
Spence
Quote+Reply
  #2  
Old 12-Feb-2012, 12:24
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,274
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
Carl at Race Supplies Direct will sell you just the plates if you contact him
Here are his Monster rearsets on Ebay
http://www.ebay.co.uk/itm/Ducati-900...em3f122 a16dd

Otherwise the bikes looking good


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  #3  
Old 12-Feb-2012, 13:06
848spence's Avatar
848spence 848spence is offline
Registered Forum User
Mille
Bikes: Ducati 848 and 583 dd race bike
 
Posts: 285
Join Date: Apr 2011
Quote:
Originally Posted by skidlids
Carl at Race Supplies Direct will sell you just the plates if you contact him
Here are his Monster rearsets on Ebay
http://www.ebay.co.uk/itm/Ducati-900...em3f122 a16dd

Otherwise the bikes looking good

Thanks, But will the rest of the pegs and linkage parts work with mine? being they are made by different people?
Quote+Reply
  #4  
Old 12-Feb-2012, 13:54
bradders's Avatar
bradders bradders is offline
Registered Forum User
MotoGP God
Bikes: 848, M620 DD bike
 
Posts: 11,913
Join Date: Aug 2003
Mood: waiting...
is
f they came from me, they came from Carl, as I always buy my race bits from him. Pegs should be the same; you going ditrect off the gear box and 916 rear brake? If so linkage doesnt matter

pop round if you want to borrow a new set to try first - I have a new spare pair of hangers
Quote+Reply
  #5  
Old 12-Feb-2012, 13:57
ells's Avatar
ells ells is offline
Registered Forum User
500SD
 
Posts: 566
Join Date: Jun 2008
Err,
what about swapping the pegs over on to the other side? Can that be done? They do look like SS pegs, On a monster the foot peg should be directly below the two threads in the frame. Either that or I need to do my eye test again. Pictures below

http://www.ukmonster.co.uk/monster/s...ad.php?t=31944

This is not my bike but should show you the way I think they should go.

Last edited by ells : 12-Feb-2012 at 14:09.
Quote+Reply
  #6  
Old 12-Feb-2012, 14:17
ells's Avatar
ells ells is offline
Registered Forum User
500SD
 
Posts: 566
Join Date: Jun 2008
Oh,
I forgot SES do sell spares so you may be able to buy just the plates from them. You may also nmee the linkage.
Quote+Reply
  #7  
Old 12-Feb-2012, 14:42
Spjallen Spjallen is offline
Registered Forum User
500SD
Bikes: Honda CB350 K4, Ducati 749s
 
Posts: 545
Join Date: Aug 2011
What make have you got on now? If you ring Carl at race supplies I'm sure he'll sort you out. His number is 01362 683366. Are you just test fitting the in picture as the brake and gear levers look far too low.
Quote+Reply
  #8  
Old 12-Feb-2012, 20:50
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,274
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
Quote:
Originally Posted by 848spence
Thanks, But will the rest of the pegs and linkage parts work with mine? being they are made by different people?

Can't see why not, they are just 10mm thick alloy plate once you remove the pegs, levers etc.


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  #9  
Old 22-Mar-2012, 23:40
miintsauce miintsauce is offline
Registered Forum User
 
Posts: 12
Join Date: Mar 2012
Quote:
Originally Posted by 848spence
Right here is my bike and here is my problem...


I bought these rear sets thinking they were for a monster but now they are on an fitted are really high and do not conform to acu regs. I have spoke to few people and they say they are for the SS.Was going to start making some adjuster plates up this week but before i waste some time does anyone have any that would like to swap? or sell? I would only need the actual part that bolts to frame.
many thanks
Spence


Hi, if these rearsets do fit a ss (carb) im interested in them, how much are you after??
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 22:09.