Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-May-2016, 15:05
rspete rspete is offline
Registered Forum User
 
Posts: 10
Join Date: May 2016
900SS fork rot - help needed

Help!
Advice needed…
95 900SS
Friday I noticed a small patch of oil under the nearside fork leg….
I knew that the stanchions would need replacing or replating soon and this was making the decision for me ahead of its MOT.
Start looking on the internet for seals, bushes, stanchions etc and think about posting in these forums asking if anyone can recommend on hard chrome platers in the UK and any advice on the necessary rebuild….

Also realise I need someway of supporting the bike while the doing this job so order a front head paddock stand…

Any ways… Looking on ebay I find these
http://www.ebay.co.uk/itm/Ducati-900...AOSw~gRV3c~ I
sensible..ish price …what can be up with them?

Then I check out the photos and see the corrosion on the outer/upper alloy tubes….
A sense of growing dread and I go back to check mine….nowhere near as bad but unmissable corrosion eating into the alloy tube…

So now a real dilemma.. No point in sorting seals/bushes or stanchions when the uppers also need replacement..

• Has anyone got a set of Showa GD-011 forks for a 95 900SS in good order they would be prepared to sell?
• Anyone with upper tubes they would sell?
• Any suggestions of alternatives, Ducati or otherwise, that would fit with minimal effort? I guess later SS iE are longer and bigger dia so would need new triple clamps and calipers?

Any suggestions at all would be most welcome.
(looks like I need new front discs too…. Its been sat a while as I work away from home - paying for the neglect now…)

My apologies in advance I have posted this on another forum however this one seems more appropriate due to being UK based.
Attached Images
File Type: jpg IMG_5204.JPG (53.0 KB, 4 views)
File Type: jpg IMG_5207.JPG (59.2 KB, 2 views)

Last edited by rspete : 09-May-2016 at 20:36.
Quote+Reply
  #2  
Old 09-May-2016, 13:11
antonye's Avatar
DSC Member antonye antonye is offline
Administrator
Webteam
MotoGP God
Bikes: 748S, HM1100S, V4SP, Was: DD-A #111
 
Posts: 13,053
Join Date: Feb 2002
Mood: Passion Killer
I think the fork upper tubes are the same between SS and SSie; I know when we put SSie forks into my old SS yokes there were no changes required.

Also, I know that Andy (Hypermoturd) on here has a load of forks parts for sale including uppers and stanchions, as well as a complete set of forks that should fit as well!

I'll give him a nudge...


I'd rather die peacefully in my sleep like my Grandfather,
than screaming in terror like his passengers.- Jim Harkins

Ducati 748S | Ducati Hypermotard 1100S | Ducati Panigale V4 SP #876 | 600-620SS DesmoDue Racebike #111 <-- Sold!!
Quote+Reply
  #3  
Old 09-May-2016, 13:57
DSC Member Hypermoturd Hypermoturd is offline
DSC Club Member
Bikes: Scrambler Desert Sled, Hyper 1100s, 750ssie, ST4S, Multistrada 1000, 900ssie, 750 Sport, 750 Indiana
 
Posts: 19
Join Date: Jun 2013


Have been nudged and have the bits in the photo available. Used but in good condition with no damage etc.

Last edited by antonye : 09-May-2016 at 14:30.
Quote+Reply
  #4  
Old 09-May-2016, 20:38
rspete rspete is offline
Registered Forum User
 
Posts: 10
Join Date: May 2016
Hi Andy

Thanks for the response.

What are these from as the uppers llok different to the ones on mine which I believe are Showa GD011's.

(I have edited my original post to include a couple of photo's of the damaged forks.)
Quote+Reply
  #5  
Old 12-May-2016, 08:49
Iconic944ss's Avatar
Iconic944ss Iconic944ss is offline
Registered Forum User
WSB Hero
Bikes: 1993 - 944SS & Aprilia Falco
 
Posts: 7,794
Join Date: Oct 2002
Lots for sale in the USA but you will suffer an import duty.

You could change to later forks from another series, but as well as a new triple, you will need a new front wheel and speedo drive & clipons.

There are some half decent 600SS forks (brake hose rub and chrome pitting) on Ebay UK, I think the 900 internals might fit? I'm sure Kev (Skidlids) will know the answer to this one.

http://www.ebay.co.uk/itm/Ducati-600...-/282005826011

OR

There is a UK seller with a brand new stanchion (1 only) here:

http://www.ebay.co.uk/itm/NEW-OEM-Du...-/401016937083

Good luck
Quote+Reply
  #6  
Old 14-May-2016, 22:41
skidlids's Avatar
DSC Region Organiser skidlids skidlids is offline
MotoGP God
 
Posts: 18,274
Join Date: Apr 2002
Mood: Its ONLY a Bike Club
note 600SS forks are Marzocchi and have a 40mm diameter slider, they are also non adjustable, but would fit as spindle, caliper and mudguard mounts are the same

Later forks from an injection bike use 65mm caliper mounts, different mudguard mounts and a 25mm diameter spindle, yoke sizes are the same at 50mm top and 54mm bottom


Checkout the Desmo Due Paddock on Facebook
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 10:23.