hey guys. just had my 749 in bits and rebuilt it and come across a problem, which is now when I turn egnition on and it reads the key etc lights go out then I press the start button and it turns over but wont stop turning over when I take my finger off the start button so have to switch it off by the off switch on the handle bars or by the egnition, flick it back on and its ok till I press the starter button again. So got any ideas?? close to putting my head through the noose but that wont help. all ideas and I will be greatfull.
Firstly, go over and check the bits you've taken off. The starter button can stick if the mounting screws are overtightened. The plastic moulding distorts. Other than that, the solenoid could be sticking. Don't leave the engine running with the starter spinning it over to for too long. It'll more than likely wear the spragg clutch.
done all that nelly changed the selenoid and the switch on the bars cos I have one I am breaking. he seemed adoment thats what they do I might have to contact ducati and see what they have to say but there again I can always use the 748 good old reliable thing and in the best colour (yellow) looks like the ropes going on. good old technoligy!!