| Yes...and Kind of!
It depends on the year of your bike. My early 1995 916 is one of the few models that prove a little tricky to wire up. Its missing a piece of the circuitry required to activate the neutral side of the indicator. Without this you can't program it.
I got around it by installing an extra 3 pin relay, which sits behind the nosecone, that now gives me the required input. This was done with the aid of the technicians at Digitool who where very helpful.
I think if your bike is 1996 or later, you should be OK, and if so then they are very easy to fit. | 
Linear Mode
