Problems With Slipper Clutch
I recently bought a Bucci Clutch on ebay
The clutch disks were not the same from the instructions, but since I have some spare clutch disks I used them to obtein the instrutions disks compilations.
The problem is that when starting to move the bike, in a low engine rotation, every thing is fine, but if I rev the engine to 3500 rpm or more, at firts every thing seams fine, but then the bike jumps a lot and squils - makes funny noises - (sometimes it iven stalls) and finally stops the jumps and rolls ok.
I tryed a lot of thing to try to stop this:
- i've sanded the iron disks
- I add another iron disk to obtein a 38mm thick group of disks
but It keaps doing the same.
Every thing else is ok. The slipper clutch is work well when I Reduce gears and while rolling, the clutch is smooth like it sould.
Please try to gide me trough this problem