Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Stand broke on 748

[Steve]

The bracket that holds the stand to the engine bloody snapped in half - result broken top fairing, broken bottom fairing, scratched mirror casing. Any one know where I can get these bits? Especially need the stand bracket and bolt quickly. Also where can I get fairings from

[antonye]

Give Nelly a call at Cornerspeed.co.uk as he will tell you if they are still available new.
Otherwise it'll be a trawl through ebay!

[Steve]

Originally Posted by antonye

Give Nelly a call at Cornerspeed.co.uk as he will tell you if they are still available new.
Otherwise it'll be a trawl through ebay!

i will thanks, been quoted ninety quid so far

[ChrisBushell]

Steve,

I think I may have a spare one in the garage from a 996/998 which I think is the same. Drop me a PM with your mobile number and I will give you a call.

Chris

[hawkati]

...and, strangely enough, i have the same problem. Originally my sidestand bracket broke, causing one of the bolts to break in the engine casing. I replaced the sidestand bracket, but it weas worn - this meant the stand leant forward too much, so the bike's leaning over further than the tower of Pisa and it's only a matter of time before that brackret/bolt/everything else breaks.
Would anyone have a 996 sidestand bracket that's either new or s/h unworn? cheers in advance, jamess

[Steve]

Originally Posted by hawkati

...and, strangely enough, i have the same problem. Originally my sidestand bracket broke, causing one of the bolts to break in the engine casing. I replaced the sidestand bracket, but it weas worn - this meant the stand leant forward too much, so the bike's leaning over further than the tower of Pisa and it's only a matter of time before that brackret/bolt/everything else breaks.
Would anyone have a 996 sidestand bracket that's either new or s/h unworn? cheers in advance, jamess

Speak with Chris Bushall he has a contact