DP Electronic QSG Gear Change 965043AAA

jb1000rr · 25-May-2015, 23:41

Hi Ducati Sporting Club,

I've managed to track down a Ducati Performance Electronic QSG Quick Speed Gear Shifter, part number 965043AAA. It's a brand new part, never been fitted but it doesn't have the fitting instructions.

In the 2006 Ducati Performance accessories brochure this electronic QSG gear change was available for the SS i.e model.

Can anyone provide me with a copy of the cod.ISTR fitting instructions for this part?

Thanks and look forward to your replies,

Kind regards.

Iconic944ss · 01-Jun-2015, 10:56

I think I found this item on Ebay so, I'm guessing you are the buyer?

There is a reply on Ducati.ms for you.

Failing that I think Ducati themselves are the next port of call.

Good luck - Frank

jb1000rr · 01-Jun-2015, 16:05

Hi Frank,
Thanks to duc_stroyer on Ducati MS, he has fitted the same system to his 996 and was able to tell me exactly where the QSG wiring loom fitted into the bikes loom. This was the last piece of the jigsaw that I needed.
Regards.

skidlids · 01-Jun-2015, 18:28

The 2 amphenol sockets and the 2 amphenol plugs I would have though would plug in line with the coils to provide the interrupt

Other than that there is a earth with eyelet and a trigger wire

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

01-Jun-2015, 10:56	#2
Iconic944ss Registered Forum User WSB Hero Bikes: 1993 - 944SS & Aprilia Falco Posts: 7,794 Join Date: Oct 2002 Location: north east I think I found this item on Ebay so, I'm guessing you are the buyer? There is a reply on Ducati.ms for you. Failing that I think Ducati themselves are the next port of call. Good luck - Frank Reply

01-Jun-2015, 16:05	#3
jb1000rr Registered Forum User Posts: 5 Join Date: May 2015 Hi Frank, Thanks to duc_stroyer on Ducati MS, he has fitted the same system to his 996 and was able to tell me exactly where the QSG wiring loom fitted into the bikes loom. This was the last piece of the jigsaw that I needed. Regards. Reply

01-Jun-2015, 18:28	#4
skidlids MotoGP God Posts: 18,274 Join Date: Apr 2002 Location: Oxford Mood: Its ONLY a Bike Club The 2 amphenol sockets and the 2 amphenol plugs I would have though would plug in line with the coils to provide the interrupt Other than that there is a earth with eyelet and a trigger wire Checkout the Desmo Due Paddock on Facebook Reply