Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
Old 27-Jan-2009, 21:23   #1
keith888 keith888 is offline
Registered Forum User
GTL
Bikes: Ducati 888, Suzuki RG500, Triumph Preunit
keith888's Avatar
 
Posts: 403
Join Date: Jun 2005
Location: Nottingham
Mood: On the up
clutch fluid contamination
Hi Guys,

Can anyone can identify the source of this light coloured fine 'stuff' that has slowly been accumulating in bottom of the 888's clutch hydraulic reservoir over the last couple of years? Hopefully more obvious on the photo. I always thought that the clutch fluid on Ducatis went black but (after 3 years) mine was still only a dark straw colour. I'm running a standard clutch slave that I rebuilt 3 years ago. Now cleaned (no sign of any leakage from the slave), fluid changed and all is fine but I'm curious.....

Thanks,

Keith
Attached Images
File Type: jpg DSC01505.JPG (57.4 KB, 22 views)
Reply
Old 28-Jan-2009, 11:55   #2
gordonparker gordonparker is offline
Registered Forum User
Big Twin
gordonparker's Avatar
 
Posts: 1,277
Join Date: Oct 2005
Location: Bucks
Could be that the fluid is breaking down, normally you should change your fluid every 2 years regardless of use as I belive it will absorb moisture which in turn will affect the performance ???

Gordon
Reply
Old 28-Jan-2009, 14:49   #3
DSC Member Jools Jools is offline
DSC Club Member
BSB Star
Jools's Avatar
 
Posts: 6,930
Join Date: Jul 2002
Location: Bedfordshire
Mood: MT Meglomaniac
I agree with Gordon. Moisture laden air is bound to get into the system over the course of a couple of years. Hydraulic fluid is very hygroscopic and will absorb the water from the air (that's why you always have to use fresh fluid rather than stuff from a can that's half empty).

The 'stuff' could just be emulsified fluid, but it's a good idea to flush it out because when the fluid gets hot the water in it will vapourise, and because you can't compress liquid but you can compress gas, the lever will get very soggy.

Not so much of a problem with your clutch, but with your brakes


The Patent Jools Mood Meter -Today I am:


___________^
Reply
Old 28-Jan-2009, 15:02   #4
keith888 keith888 is offline
Registered Forum User
GTL
Bikes: Ducati 888, Suzuki RG500, Triumph Preunit
keith888's Avatar
 
Posts: 403
Join Date: Jun 2005
Location: Nottingham
Mood: On the up
I'm certain its not the (5.1) fluid breaking down. I've certainly never seen anything like that before on fluid that was much more than 3 years old. The brakes were done at the same time certainly nothing nasty flushed out of that system so it seems to be something unique to the clutch system.

Keith
Reply
Old 28-Jan-2009, 23:57   #5
Scooter916 Scooter916 is offline
Registered Forum User
Big Twin
Scooter916's Avatar
 
Posts: 1,291
Join Date: Feb 2005
Location: Cleethorpes
Mood: Hmmm Conference season
Just athought, When you rebuilt the Clutch slave, Did you smear the seal in Grease??? it could be the grease finding its way back up the line.
Is 5.1 Compatable with the plastic pot????
Glyn
Reply
Old 29-Jan-2009, 12:54   #6
keith888 keith888 is offline
Registered Forum User
GTL
Bikes: Ducati 888, Suzuki RG500, Triumph Preunit
keith888's Avatar
 
Posts: 403
Join Date: Jun 2005
Location: Nottingham
Mood: On the up
Hi Glyn,

I only used brake fluid on the slave bore and piston seal as per manual. I did, however, put a fair bit in the cavity between the top of the piston and the seal that the push rod passes through. I did get a bit of air out when I was flushing the system so maybe my slave seal is actually on the way out (even though not dripping) and some of that grease got sucked into the system at some point?

Keith
Reply
Old 29-Jan-2009, 13:24   #7
007 007 is offline
Registered Forum User
500SD
Bikes: 996 Bip
007's Avatar
 
Posts: 524
Join Date: Nov 2007
Location: Henley-on-Thames
Mood: CITIUS EST MELIUS!
Hello Keith,

dot 4 (glycol based, boils at 230C)
dot 5 (silicone based, boils at 260C)
dot 5.1 (glycol based, boils at 270C)

Dot 4 & 5.1 are both glycol based and therefore hygroscopic.

Dot 5 is a silicone blend, and is not hygroscopic, but can cause premature wear in seals, as moisture is forced into the rubber or plastic. They are also more compressible.

Mixing DOT 4 & 5.1 is fine, but if yor wish to consider a silicone blend, you will need to flush the system, or you will experience a chemical reaction causing solids to precipitate out of the mixture and clog up your braking system.

Best regards.

Last edited by 007 : 29-Jan-2009 at 17:51.
Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 02:41.