Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 999 / 749 > 749R clutch pressure plate ?

[DaveO749R]

Hi Guys

I have a carbon vented clutch cover taken from my Monster which looks like it will fit just woundered if somebody could give me a little advice.

Will any anodised 749 clutch pressure plate fit the R's or is it different (being a slipper clutch and all that). If the answer is yes where is the cheapest place to purchase one.

Regards

[butch890]

Any clutch cover will fit but you will have to machine out the "barbs" on the outer edge.
Butch

[DaveO749R]

Cheers Butch

The cover will fit I am certain but I would like a pressure plate to complete the look.

Does the standard anodised 749 ducati plate fit.

Regards

[iang]

NO, As Butch says the standard anodized plate has teeth on the back, a slipper clutch needs a pressure plate with no teeth, or you can machine them off any toothed version.

[DaveO749R]

Hi Iang & Butch


Ahhhhhh now I understand I will source one and check it out and of course machine it as required.

Cheers Guys

Dave O