Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Something not quite right!!

[mbracing748]

I thought I would share this with everyone. Whilst Racing at oulton something strange happened.....




It's also screwed the lobe on the SP cam shaft.... So if anyone has a set of SP Cams I'll be happy to purchase...

[nelly]

Seen that happen a few times. Usually down to the closing shim being tight... It "pulls" the top off the valve, straight thru' where the 1/2 rig groove is machined....

Is it 748 or 916 Sp? Gotta a strange suspicion i have 748SP cams BNIB

[ducati dad]

SP cams from Rally

http://www.italiansportingclub.co.uk...topic4487.html

[mbracing748]

Originally Posted by nelly

Seen that happen a few times. Usually down to the closing shim being tight... It "pulls" the top off the valve, straight thru' where the 1/2 rig groove is machined....

Is it 748 or 916 Sp? Gotta a strange suspicion i have 748SP cams BNIB

It's a 748SP - I hoping to speak to Mike D tomorrow to get the bike to him before a start purchasing items, If you wanna sell then mail with a price ;-)...