Morning all, just wondered how much of a job it is to fit a slipper clutch to the 749. Have been thinking about doing this for a while, but also fancied a nice open cover to go with it, have seen JHP have a good offer on their slipper clutch and cage at the minute, so am tempted. But since they're in Coventry and i'm in sunny Manchester, i'm thinking it's a fair way to go to get it fitted, (especially as i'm not sure how long it takes). http://www.ducaticoventry.com/.
Goto the website, on the top toolbar click on JHP Perfomance, then performance parts, and it's the clutch kit special offer... should be £237.60 going for £196.02
Cover off, six allen headed bolts. Magnet to get all the plates out. One big nut, 6 bolts for the basket. Replace basket, and hub, torque big nut. Build stack, measure height, swap steel plates to obtain correct height if required, fit pressure plate. Replace cover.