Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Amp Superseal connectors

[Col996s]

Hi,

I'm fitting a translogic dash to my 996 and am after a couple of connectors to avoid disturbing the bike wiring. The connectors I am after are a 6 way and 10 way (female inserts)
The 6 way is available from various distributors but I can't find the 10way anywhere.
One way would be to buy a second hand loom with these on and strip them down. There is one on Ebay but more then I want to pay for a couple of connectors.

Does anybody have any old looms with these connectors on that I could buy off them.

[Chrisiball]

Hi Col
Iam soon to be building a loom for my RGV500 and will be using these connectors. I have looked for the best price for them but they are pretty expensive for what they are. I have to say i havent seen a 10 way connector. And this seems to be the cheapest place to buy them from.
Chris

http://www.kabelschuhe-shop.de/Conne...28v9 7n42fdo6

[John W]

Col,
amp doesn't make this connector in a 10 way...

I've looked at their catalogue and they only go up to 6 way.
Are you sure it is an superseal variety, and not something different ?

http://www.tycoelectronics.com/catalog/menu/en/10238

I usually get my connectors from RS (if in a hurry as they aren't cheap),
www.vehicle-wiring-products.eu (most of the time),
www.autosparks.co.uk,
http://www.autoelectrics.net/wiring.html,
http://www.autoelectricsupplies.co.uk (second choice).

Hope that helps.

[Col996s]

Hi John,

I'm not sure that it is, it just looks exactly like the 6 way which I'm sure is made by Amp (Tyco)

It is the lower one on the left in the photo.

[Jasper]

I am pretty sure I have one somewhere,I will look tomorrow for you.

[Col996s]

Originally Posted by Jasper

I am pretty sure I have one somewhere,I will look tomorrow for you.

Thanks Jasper.

Beer tokens waiting.

[antonye]

Just had a look as well but nothing in my pile of junk suitable!

[John W]

Col,

can you post a picture of the end of the connector please.
I need to see if it has round, flat, or square pins. Also, is that the socket end or the plug end.

It looks like a Delphi connector to me, but its tricky to tell from that picture.

[skidlids]

I'd go with a Delphi
http://www.kabelschuhe-shop.de/produ...oducts_id=8154

[Col996s]

You guys are amazing.
It is the female end that I need. I don't have any other pictures John. the picture I put up was pinched from someone elses build project story.
It certainly looks like a Delphi.

Maybe the 6 way is a Delphi as well?