Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Sorry

[adam]

Sorry to bore you about my brake problem but, would another make brake disc such as , ap or Brembo, work with my PFM calipers?

[Edited on 3-2-2005 by adam]

[skidlids]

Ap narrow track ones spring to mind, especially as the AP 6 pot uses the sama Pads as the PFMs.
When I fitted a PFM setup to my Race Fireblade I used Ferodo pads listed for the AP calliper

[Rattler]

Adam
Why are you looking to swap the calipers? The standard 996R calipers with a race brembo m/cyl are very effective and although the PFMs are better, I reckon its a costly upgrade for the additional performance.

If its purely for looks, go for radials - speak to JHP!!!

Tim

[adam]

Tim its not that costly as I already have all the parts, though not fully functional. Radials would be very expensive.

[Rattler]

Originally posted by adam
Radials would be very expensive.

You're right, just ask Jon!!!

[adam]

only just managed to get hold of PFM, they sell the carriers seperatly, £95.00 each. what a result, saves me messing around with my calipers. Should have them by the end of next week.

[Jon]

Wise move Adam, the AP narrow track disc's would set you back £465.00 or there abouts

[adam]