Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 03-Feb-2013, 13:41
phill obbc's Avatar
phill obbc phill obbc is offline
Registered Forum User
Montjuic
Bikes: cbx1000 and ducati 748 749
 
Posts: 53
Join Date: Jul 2006
749 light issue help please

Hi all,
i have a 749s 2006 which i bought as atrack bike, she is almost ready to use now as a track day is fast approaching.
However i have noticed that the orange EOBD light comes on after she is started ,not straight away and stays on does anyone know why, she has been lightened so anything not needed has been removed by previous owner, she seems to run fine although not been out her yet ...... weather,
i need to get this resolved asap,
any help would be great,
Thanks all

Regards Phill
Quote+Reply
  #2  
Old 03-Feb-2013, 13:55
chrisw's Avatar
chrisw chrisw is offline
Registered Forum User
500SD
Bikes: 999 Mono/1198S
 
Posts: 803
Join Date: Jun 2002
Mood: Messing with diagnostics
Assuming the original clocks are one the bike, press and hold the left button on the clocks whilst switching the ignition on. This will bring up the EFI fault code.

ERROR CODES

1.1 = Throttle Position Sensor (TPS) Disconnected
1.2 = Throttle Position Sensor (TPS) short circuit to earth
2.1 = Pressure Sensor short circuit to power supply
2.2 = Pressure Sensor shorted to earth
3.1 = Water Temp Sensor shorted to power supply
3.2 = Water Temp Sensor shorted to earth
4.1 = Air Temp Sensor shorted to power supply
4.2 = Air Temp Sensor Shorted to earth
5.1 = Battery Hi
5.2 = Battery Lo

10.1 = Horizontal Coil shorted to power supply
10.2 = Horizontal Coil shorted to earth
11.1 = Vertical Coil shorted to power supply
11.2 = Vertical Coil shorted to earth
12.1 = Inj1 shorted to power supply
12.2 = Inj1 shorted to earth
13.1 = Inj2 shorted to power supply
13.2 = Inj2 shorted to earth
14.1 = Inj3 shorted to to power supply
14.2 = Inj3 shorted to earth
15.1 = Inj4 shorted to powersupply
15.2 = Inj4 shorted to earth
16.0 = Pump Relay
17.1 = L/H Fan shorted to power supply
17.2 = L/H Fan shorted to earth
18.1 = R/H Fan shorted to power supply
18.2 = R/H Fan shorted to earth
19.1 = Starter Solenoid shorted to power supply
19.2 = Starter Solenoid shorted to earth

30.0 = ROM/Eprom error
34.0 = Signal Panel Sensor
36.0 = Speed sensor
37.0 = Immobiliser (transponder)
37.1 = Immobiliser (antenna)
37.2 = Immobiliser (instrument panel serial driver)
37.3 = Immobiliser (serial cable disconnected)
37.4 = Immobiliser (ccm serial drive)
37.5 = Immobiliser (key not recognised)
37.6 = Can Line error
Quote+Reply
  #3  
Old 03-Feb-2013, 15:58
chrisw's Avatar
chrisw chrisw is offline
Registered Forum User
500SD
Bikes: 999 Mono/1198S
 
Posts: 803
Join Date: Jun 2002
Mood: Messing with diagnostics
Try running until the light comes on, then try to do the button/ignition thing. Alternatively, download Ducatidiag and buy the leads and you will be able to read the stored codes
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 17:24.