Ignition switch wiring

keith888 · 19-Feb-2006, 18:04

Hi Guys,

I've just put my newly repainted triple clamp back and discovered that my collection of 'dismantling' photos don't show the ignition cable routing. Unfortunately, the Ducati manual doesn't seem to show the routing either. If anyone can give me any pointers that would be great.

Thanks,

Keith

Charlie · 20-Feb-2006, 23:52

Facing forwards my cable exits out of the lower r/h side of the ignition switch down to the bottom yoke, r/h under the front headlamp frame clamp/steering head its tie wrapped with the rest of the loom along the l/h spur of the headlamp frame to the connector block assy on the l/h side. If you want a piccy just shout.

keith888 · 21-Feb-2006, 18:35

Your description was great so no need for a pic.

Thanks!

Keith

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode
Postbit Selector
Use Horizontal Postbit

21-Feb-2006, 18:35	#3
keith888 Registered Forum User GTL Bikes: Ducati 888, Suzuki RG500, Triumph Preunit Posts: 403 Join Date: Jun 2005 Location: Nottingham Mood: On the up Your description was great so no need for a pic. Thanks! Keith Reply