Zimbo, I have a M10x1.5 helicoil tap you can use which is a standard size for the M10 helicoil, not sure about the 1.0 pitch helicoil tap you need. If you want to borrow this one I will post it to you and you could return by post when finished. u2u me your address if you need it. Or if you prefer you could send me the bracket that needs helicoiling and I would do it for you, foc. FE Oh, FYI the tapping drill size for the M10 helicoil is 10.3mm [Edited on 31-3-2006 by final_edition] [Edited on 31-3-2006 by final_edition] [Edited on 31-3-2006 by final_edition] |