Ducati Sporting Club UK
Private Adverts
Use this forum for all private adverts. You must have been a registered member on this board for at least 14 days before you are allowed to post.
 
 
Thread Tools Display Modes
  #1  
Old 10-Jul-2009, 01:38
phillc phillc is offline
Registered Forum User
Big Twin
Bikes: 996 race bike
 
Posts: 1,957
Join Date: Apr 2003
Mood: Almost over it.
Where to buy - 996 racing ally rear subframe

Can anyone recommend me a good place to buy an ally rear racing subframe for a 996?

Thanks!
Quote+Reply
  #2  
Old 10-Jul-2009, 10:28
boggy 8 boggy 8 is offline
Registered Forum User
Mille
 
Posts: 218
Join Date: May 2004
try moto46
Quote+Reply
  #3  
Old 10-Jul-2009, 12:02
phillc phillc is offline
Registered Forum User
Big Twin
Bikes: 996 race bike
 
Posts: 1,957
Join Date: Apr 2003
Mood: Almost over it.
Quote:
Originally Posted by boggy 8
try moto46

Thanks. Will call them.
Quote+Reply
  #4  
Old 10-Jul-2009, 14:25
pguenet pguenet is offline
Registered Forum User
Big Twin
 
Posts: 1,413
Join Date: Aug 2002
Carefull, 996 and 748 are almost the same but not quite.
996 is based on the SPS one and was designed to take the P8 whereas the 748 was designed for the 1.6. Not that it matters that much for the ECU because a race bike has it front mounted anyhow... but the carbon seat supports are different for either bikes.
Quote+Reply
  #5  
Old 10-Jul-2009, 17:44
phillc phillc is offline
Registered Forum User
Big Twin
Bikes: 996 race bike
 
Posts: 1,957
Join Date: Apr 2003
Mood: Almost over it.
Quote:
Originally Posted by pguenet
Carefull, 996 and 748 are almost the same but not quite.
996 is based on the SPS one and was designed to take the P8 whereas the 748 was designed for the 1.6. Not that it matters that much for the ECU because a race bike has it front mounted anyhow... but the carbon seat supports are different for either bikes.

Right so, a 748SPS or 748R subframe should work, right?

Not sure we'll have the necessary time to sort a wiring harness to front mount the ECU.
Quote+Reply
  #6  
Old 11-Jul-2009, 11:50
powerwheelie powerwheelie is offline
Registered Forum User
Bevel Head
 
Posts: 91
Join Date: May 2008
Itīs not going to fit properly. I went through it with my 748S ECU and wiring harness. Bought a 996 al subframe and had to lengthen the wiring loom by about 10cm.
Quote+Reply
  #7  
Old 11-Jul-2009, 16:47
chris.p's Avatar
chris.p chris.p is offline
Registered Forum User
DSC Club Rep
Ducati Corse
Bikes: Monster 1100 EVO
 
Posts: 3,969
Join Date: Jul 2003
Mood: I'm A Grandad again :-)
This any good for you???

http://cgi.ebay.co.uk/ducati-748-916... A1%7C294%3A50


Chris
Quote+Reply
  #8  
Old 11-Jul-2009, 16:55
pguenet pguenet is offline
Registered Forum User
Big Twin
 
Posts: 1,413
Join Date: Aug 2002
Quote:
Originally Posted by phillc
Right so, a 748SPS or 748R subframe should work, right?

Not sure we'll have the necessary time to sort a wiring harness to front mount the ECU.

Depends what ECU you run.
If you run a P8 you need to look for a 996 ally subframe - generally coming from 996 SPS bikes.
Quote+Reply
  #9  
Old 11-Jul-2009, 16:56
pguenet pguenet is offline
Registered Forum User
Big Twin
 
Posts: 1,413
Join Date: Aug 2002
Quote:
Originally Posted by chris.p


That one looks like a 748 one to me.
Quote+Reply
  #10  
Old 11-Jul-2009, 18:18
powerwheelie powerwheelie is offline
Registered Forum User
Bevel Head
 
Posts: 91
Join Date: May 2008
Yes, thatīs one for the M1.6 ECU.
Quote+Reply
  
Thread Tools
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 00:37.