Ducati Sporting Club UK > Model Specific - Discussion, Technical Problems and Help > 998 / 996 / 916 / 748 > Choke advice 996r

[9rrr]

Any you guys running Brembo aftermarket Clutch radial master cylinders. What did you do to secure the choke as it is normally secured by a small pin. Aftermarket one dosnt have this facility. Is it just going to spin around when I try and use the choke. Help.

[skidlids]

On my 998 i did away with the choke cable and fitted a 916 throttle assembly with the fast idle button on the underside

[Jon]

I will have to check what I did 9rrr. I too have the brembo radial clutch, but for the life of me, can't remember if I had prob's with the fast idle. I will take a look tomorrow and let you know.

[khu996]

Originally Posted by 9rrr

Any you guys running Brembo aftermarket Clutch radial master cylinders. What did you do to secure the choke as it is normally secured by a small pin. Aftermarket one dosnt have this facility. Is it just going to spin around when I try and use the choke. Help.

Im in the same boat. I havent secured it properly, just left it wedged between the switches and clutch cylinder. Would also welcome a more tidy suggestion!

[khushy]

the choke cable was too short when I fitted wider bars and the brembo MC so for a while I thought I will just discoonect it altogether - that was 18 months ago - I havent used the choke since at all!

Khushy

PS and no it doesnt idle at 3000 rpm either!