Ducati Sporting Club UK
 
 
Thread Tools Search this Thread Display Modes
  #1  
Old 18-Apr-2012, 19:52
welsh999 welsh999 is offline
Registered Forum User
 
Posts: 8
Join Date: Jun 2007
999 new clutch

After some help.
Put new clutch plates in as last set worn, clutch works ok but clutch is dragging when pulled in.If i put the rear brake on whilst on padock stands wheel stops as expected and the cluch stops spinning, engine ticks over fine.Was also tricky to get into neutral with engine running but bleeding the master cylinder sorted this. Will the clutch bed in or have i missed something.
Quote+Reply
  #2  
Old 20-Apr-2012, 17:20
nelly's Avatar
nelly nelly is offline
Registered Forum User
Ducati Corse
 
Posts: 3,134
Join Date: Jan 2002
Mood: Bloo and Yellow.. and Red now ;)
Are you running a aftermarket slave cylinder? The new pack will be slightly thicker than the old one and a different slave will have a shorter throw.
As well as bleeding the master, do a full bleed as the slave may have took air in when the pressure plate was removed.
If you've got the reach, try setting the lever a little further out.
Quote+Reply
  #3  
Old 20-Apr-2012, 20:48
welsh999 welsh999 is offline
Registered Forum User
 
Posts: 8
Join Date: Jun 2007
thanks Mate will give that a go.
Quote+Reply
  #4  
Old 21-Apr-2012, 19:22
welsh999 welsh999 is offline
Registered Forum User
 
Posts: 8
Join Date: Jun 2007
Ok bled the slave cylinder and then the master again, gave a good flush through and now all working fine.
Quote+Reply
  
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes
Postbit Selector
Switch to Vertical postbit Use Vertical Postbit

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Recent Posts - Contact Us - DSC Home - Archive - Top
Powered by vBulletin 3.5.4 - Copyright © 2000 - 2024, Jelsoft Enterprises Ltd. - © Ducati Sporting Club UK - All times are GMT +1. The time now is 19:50.