Wanted 600 carb flywheel rotor

knappers · #1 21-Sep-2016, 12:30 PM

Would anyone have, or know of anyone who has a 600 carb flywheel rotor to sell?

Thanks

skidlids · #2 22-Sep-2016, 10:32 PM

Do you have a pic of the part you need

knappers · #3 27-Sep-2016, 06:49 PM

I haven't had chance to get to it to take a pic.
Its the magnetic rotor that spins inside the stator.
The link below shows it, its in the bottom left corner of the drawing. Thanks

http://www.stein-dinse.biz/eliste/el...6ebeb36g&lg=de

skidlids · #4 27-Sep-2016, 08:16 PM

I'll have a check to see what I have, similar to the early 748 and 916 but narrower if I recall correctly but without measurements it is probably hard to tell one from the other

knappers · #5 27-Sep-2016, 09:29 PM

Yes you're right they are smaller. I'll look to see if I can find the dimensions again.
Thanks for your help

coppersaucepipe · #6 27-Sep-2016, 11:16 PM

What year 583 is it? Marcus Dealey may have an early one in a box with the rest of a dismantled engine.

knappers · #7 28-Sep-2016, 10:33 AM

The engine is a 95 model. Thanks

knappers · #8 29-Sep-2016, 08:20 PM

Rotor size.
OD 76mm
ID 19mm
Depth 38mm
Approx.

skidlids · #9 01-Oct-2016, 08:35 AM

I think it is the depth that is the dimension that varies between the models I will see what I have

knappers · #10 02-Oct-2016, 07:56 AM

That would be great, I'm really keen to get back on it while the weathers still good.

Thanks